Evergreeting Dioramas
Tell a story with the multiple scenes you can choose from!
YOU WILL NEED
- 1 x Laser-cut Wooden Base
- 1 x Greetings Cutout
- 2 x Battery Holders
- 2 x Backdrop Scenes
- 2 x Story Scenes
- 3 x Circuit Stickers LEDs
- 4 x Felt Base Stickers
- Copper Tape
STEP 1
Stick down the copper tape between these lines on the right
Materials
- 1 x Wooden Base
- Copper Tape
STEP 2
When you get to corners, Fold and turn the copper tape like this to prevent breaking.
STEP 3
Insert tab A of the battery holder into the corner of the base.
Materials
- 1 x Battery Holder
STEP 4
Stick down copper tape on the left and continue onto and around the battery holder.
Materials
- Copper tape
STEP 5
Insert tabs B of the battery holder into the corner of the base.
STEP 6
Lock tabs B together.
STEP 7
Stick the LED stickers down onto the base, following the direction of the print.
We highly recommend using yellow and red LEDs together instead of blue because they’ll be a lot brighter. Use the blue in another project you can download off our website instead!
Materials
- LED stickers
STEP 8
Insert a CR2032 battery into the battery holder. See your LEDs light up!
Materials
- CR2032 battery
STEP 9
Stick the felt pads at the 4 corners on the underside of the base.
Materials
- 4 x Felt Base Stickers
STEP 10
Choose the scenes you want and slot them into the appropriate slits!
Made this activity? Good Job! Now spread the word. Share a photo of your creation on social media with #letsgethacking #EvergreetingDioramas